Application Steps on Natural Nails

• Step 1. Have client wash hands.
• Step 2. Sanitize both your hands and clients hands with Natural Defense y
  Elegant Glass.
• Step 3. Use the pumice stone to push back cuticle and remove excess
  ptygerium from nail plate.
• Step 4. Remove shine from natural nail with pink side (320 grit) of file,
  being careful not to damage natural nail.
• Step 5. Use Thymol Septic by Elegant Glass to sanitize nail plate.
• Step 6. Apply Affix Adhesion Enhancer to natural nails.
• Step 7. Apply a line of Natural Finish E.G. 3000 Resin Gel down the
  center of nail starting 1/8" from the cuticle area. Brush out E.G. Resin
  with a full brush of Natural Finish Brush on Activator. Start at the
  free edge and brush forward, polishing out the Activator. Make sure you
  stay away from the cuticle area 1/8" and 1/16" from the sidewalls with
  all product. (This eliminates lifting). Wipe activator brush on a Lint
  Free Brush Wipe prior to returning it to the Activator bottle.

• Fills: Fill in the regrowth area as needed. Usually every 2-3 weeks. 
  Repeat Steps 1-5 of initial application method and proceed as follows:

• Step 6. Apply Miracle Dissolve to entire nail. Immediately roll off a
  layer of resin with 320 grit side of the Natural Finish buffer going in
  one direction with pressure.
• Step 7. Spray nails with Thymol Septic and let dry.
• Step 8. Apply Affix to natural regrowth area of nail (Do not ust affix on
  artificial product). Let dry.
• Step 9. Re-apply 1 coat of E.G. Resin 3000 and brush out with Brush On
  Activator. Let dry.